Properties
Application
The gas sampling tubes series PSG Sampling Tube are used in combination with gas sampling probes PSG Basic Probe and PSG Plus Probe for continuous extractive gas analysis. They serve for precisely representative sampling of sample gas with dust loads up to 3g/m3. Typical applications are emission measurement, process monitoring and process optimization.
Technology
The spectrum of possible gas sampling tubes covers a temperature range up to 1800°C. Due to the choice of various corrosion and temperature resistant materials the possibility for every application is given to find a fitting gas sampling tube as extension for the gas sampling probes PSG Basic and PSG Plus. All tubes have a R3/4“-male thread fitting to the female thread in the sample inlet of the gas sampling probe.
Functions
By choosing the tube length exhaust or process gas can be sampled precisely from the stack or industry process and fed to the dust filtration in the heated gas sampling probe.
You may also be interested in
6 mm / 8 mm Pressure Reduction Valve for Protection of the Sampling System
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting mobile Probe heated up to 180°C holding temperature for temporary CEMS
Controlled Probe up to 200°C holding temperature and double back purge for Process measurement with high dust load
Controlled DeNOx Probe up to 315°C holding temperature for SCR and SNCR applications with separator vessel for Ammonia salts
Self limiting Probe with 90 °C holding temperature with explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 Gb
Controlled Probe up to 315°C holding temperature for Process and Emission measurement with high dust load
Self-regulating or regulated duo probe up to 250°C holding temperature for simultaneous sampling from 2 outlets at low to medium dust loadings
Self regulating or controlled Probe heated up to 200°C holding temperature for CEMS and low to medium dust load
Temperature controlled Heated Sample Tubes for 180°C Holding Temperature
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)